MAKE YOUR OWN GHOST SHRIMP PUMP
How to Make Your Own Ghost Shrimp Pump
Ghost Shrimp Fishing Bait Ghost shrimp are great fishing bait for
Stripers and Sturgeon. They can be expensive, and during certain
times of the year they are hard to find to buy in a bait shop. Make
your own ghost shrimp pump, and catch your own ghost shrimp
before your next fishing trip and you will have the most fresh and
live ghost shrimp possible. But the best part, once you buy the
ghost shrimp pump, or make your own, from there on out the bait is Free! Yes, the bait is Free! Building
your own ghost shrimp pump to catch your own ghost shrimp for bait is easy, and fun for a family
project. Pick up the supplies at your local hardware store and make your own ghost shrimp pump today.
How To Catch Ghost Shrimp Video
Parts You Need to Build A Ghost Shrimp Pump
All you need are a few parts and supplies and you can make your own ghost shrimp pump at home in
order to catch your own ghost shrimp for bait in minutes. Here’s all the parts that you will need to build
your own ghost shrimp pump and start saving a lot of many catching your own fishing bait.
•
Take the PVC test plug, and the 2 extra washers and assemble them together.
•
Drill an appropriate hole according to the size of your bolt and of the test plug into the ¾ inch pvc
cap.
•
Make sure you do not drill the whole too big.
•
Now you can put it together with the ¾ inch cap.
•
Take your 2 inch cap, and drill a 1 inch hole in the middle.
•
Cut the ¾ inch PVC pipe to 33 ½ inches, and insert it into the 2 inch cap.
•
Attach the T to the pipe. Attach the test plug with the ¾ inch cap to the 2 inch pvc pipe.
•
Insert what you have so far into the 2 inch pvc pipe.
•
Cut the 2 inch pvc pipe in a 45 degree angle on the bottom.
•
The shortest part of the angled cut should measure 36 inches. Bring it all together, and put the 2 inch
cap on the 2 in pvc pipe.
•
The 2 inch cap is the only one that will not have PCV cement in case you need to adjust the plug.
•
Take two ¾ inch caps and two pieces about 2 inches long and put them together.
•
Insert the two pieces into the T.
•
After you like the way everything fits together, take your PVC pipe glue and glue it to every cap and T,
except for the 2 inch cap.
Ghost Shrimp Fishing Lures
About The Author
Mike Mendenhall is the the founder of Mendenhall Outdoors. This website
is an extension of the Mendenhall family’s lifestyle and passion for the
great outdoors. Everything that they learn, and experience, along the way
that they find may be valuable to our website visitors is on the site for you
to enjoy. We highlight products and services that you might find
interesting. We frequently receive free products from manufacturers to
test. This does not drive our decision as to whether or not a product is
featured or recommended. If you click a link on this page, then go on to
make a purchase, we might receive a commission – at no extra cost to you, and does not impact the
purchase price of any products that you may purchase.
The Best Ghost Shrimp Pump Experience Awaits!